Radiometer Microgas 7650 Monitor - Dräger Infinity Delta Instructions For Use Manual

Radiometer MicroGas 7650 Monitor

NOTE: The Radiometer MicroGas 7650 monitor is only supported on MIB II
hardware.
The Radiometer MicroGas 7650 monitor measures tpO
from the MicroGas 7650 monitor is acquired through an MIB interface. This data is
displayed in a non-configurable tpO2 and tpCO2 parameter box.
A waveform channel is not displayed for the
MicroGas 7650 monitor's data. There are also no site
timers and no alarms.
The tpO and tpCO
2
menu disappear when the MicroGas 7650 monitor is
connected. These entries do not reappear until this
MIB device is removed and a tpO
reconnected.
If you click the tpO
"No user selections."
MIB tpO and tpCO
2
tpCO pod parameters (see page 6-3).
2
Aspect A-2000 BIS
The Bispectral Index (BIS) is a continuously processed EEG parameter that measures
the state of the brain during the administration of anesthetics and sedatives. The
Aspect Medical BIS monitor A-2000 is connected to the bedside monitor via an MIB
interface. BIS and its associated parameters are trended and available for display on
the bedside monitor.
NOTE: For information about the BIS parameters, see documentation provided with
the Aspect A-2000 BIS Monitor.
Label
BIS
SQI
EMG
BSR
VF8 D
entries in the Alarm Limits
2
and tpCO
2
and tpCO parameter box, the setup menu displays with the text
2 2
trends appear in the trend/graph table similar to the tpO
2
®
Monitor
Parameters Supported
Bispectral Index
Signal Quality Index
Electromyography Power (70-110 Hz)
Burst Suppression Ratio
/D XL/K
ELTA ELTA
R M
ADIOMETER ICRO
and tpCO
2
pod is
2
APPA
G 7650 M
AS ONITOR
data. The data
2
and
2
Units
-
%
dB
%
28-19