Dräger Infinity Delta Instructions For Use Manual page 90

3 N A
ETWORK
Quick Reference – Remote View Setup
Menu Item
Select
Remote Bed
Alarm Group
Auto Dual View
3-14
PPLICATIONS
Description
Displays up to two waveforms and
parameter boxes of a remote bed.
If the remote bed is not in alarm,
the top two waveforms are
displayed on the local bed,
otherwise the alarming waveform
occupies the bottom channel.
NOTES:
• The monitor continuously
updates the remote bed label,
patient name, and alarm or status
messages.
• The remote display appears on
the bottom half of the screen so
that you can continue to display
the local monitor's top
waveform(s), parameter box(es),
and message area.
Assigns the monitor an alarm
group number (0 - 255), allowing
you to restrict the number of
messages received over the
network from the central station or
other bedsides
Configures the monitor to display
any remote bed in alarm that is part
of the local bed's alarm group
D /D
ELTA
Settings
1) Press the Fast Access fixed key.
2) Click on Remote View.
3) Select Remote Bed to display a list of
all beds in the monitoring unit.
4) Click on the label of the bed you wish to
view.
5) Press the Main Screen fixed key to
return to Main Screen, or click on Select
Remote Bed to return to the Remote View
menu.
NOTE: To access Remote View functions,
see the section "Remote View Screen" on
page 3-15.
1) Press the Fast Access fixed key.
2) Click on Remote View.
3) Click on Alarm Group.
4) Click on the number of the desired
alarm group.
1) Press the Fast Access fixed key.
2) Click on Remote View.
3) Click on Auto Dual View.
4) Click to toggle ON or OFF.
NOTE: Beds in the same alarm group
continue to post messages in the alarm
group's network message area when Auto
Dual View is disabled. If you do not want
to display messages at a particular bed,
place the bed in its own alarm group by
selecting an unassigned Alarm Group
number.
XL/K
ELTA APPA
VF8