Dräger Infinity Delta Instructions For Use Manual page 548

B T D
ECHNICAL
etCO Pod
2
Physical Attributes
Size (H x W x D):
Weight:
Connections:
Adult airway adapter dead
space:
Neonatal airway adapter dead
space:
Moisture resistance:
Biotoxicity:
TM
NOTE: Capnostat
Electrical Specifications
Power source:
Protection against electric
shock:
Mode of operation:
Defibrillation protection:
Environmental Requirements
Temperature range:
Relative humidity:
Atm. pressure:
NOTE: Reading complies to BTPS = body temperature 37 °C, ambient barometric pressure of
750 mmHg, and relative humidity of 100 %.
Regulatory Requirements
Standards:
B-22
ATA
Pod: approx. 140 x 140 x 51 mm (5.5 x 5.5 x 2 in)
Capnostat
Pod:
Capnostat
Sensor connector, female luer side-stream sampling port, male
luer sample exhaust port
< 5 cc
< 0.5 cc
Airway adapter can be immersed in water without damage
None per ASTM F720 (MTL #2009)
III sensor size and weight exclude cable.
Powered directly from monitor
Type CF
Continuous
Defibrillation-proof applied part per IEC 60601-1
Operating:
Storage:
Operating:
Storage:
Operating:
Storage:
IEC 60601-1, ISO 21647:2004 with Corri. 1:2005 (applicable
sections only, Oxygen analyzers for monitoring patient breathing
mixtures); EN ISO 21647:2009
D /D
ELTA
TM III Sensor: 33 x 42 x 22 mm (1.3 x 1.7 x 0.9 in)
0.5 kg (1.1 lb)
TM III sensor: 18 g
10 to 40 °C (50 to 104 °F)
–20 to 50 °C (–4 to 122 °F)
20 to 90 %, non-condensing
10 to 95 % (with packaging)
525 to 795 mmHg (70 to 106 kPa)
375 to 795 mmHg (50 to 106 kPa)
XL/K
ELTA APPA
VF8