Taking Nbp Measurements - Dräger Infinity Delta Instructions For Use Manual

Function Description
Calibrate Mode Configures NBP calibration
CAUTION:
Only qualified DrägerService
personnel should access this
function.
If you leave NBP Cal Mode ON
accidentally, NBP will default to
an NBP inactive state. To restore
NBP to normal operating mode,
power cycle the monitor.
NBP Alarms Accesses NBP alarms and
associated variables on Alarm
Limits table
NBP Chime Produces a tone when NBP
measurement is complete

Taking NBP Measurements

WA R N I N G : P r e s s t h e N B P Sta r t / St o p f i x e d k e y t o d e f l a t e t h e
c u f f r a p i d l y i f a n a d v e r s e e f f e c t o c c u r s o n t h e pa t i e n t .
Single Measurements
To perform a single measurement:
Push the NBP S
The cuff inflates, then deflates. When an NBP measurement is in progress, the
background turns white and the foreground turns black.
When the measurement is complete, a chime sounds (if selected by user) and new data
appears. To stop a single measurement in progress, push the NBP S
key.
NOTE: If an NBP reading is undetermined, the value of the previous reading in the
parameter box is blanked or the value displays as ***.
VF8 D
/S fixed key on front of monitor.
TART TOP
/D XL/K
ELTA ELTA
Settings
• OFF
• ON
Not applicable
• OFF
• ON
APPA
NBP S
ETUP
/S fixed
TART TOP
13-9