Displays - Dräger Infinity Delta Instructions For Use Manual

B T D
ECHNICAL
Electrical Specifications
Power source:
Power consumption:
Isolation:
Mode of operation:
Environmental Requirements
Temperature range:
Relative humidity:
Atmospheric pressure:

Displays

Display Unit (Kappa only)
See user manuals for the video monitor you are using. Dräger Medical recommends TFT Medical
Grade 15"/17"/19" display. The requirements for the Kappa flat panel are as follows.
VGA Display
Output resolution:
Horizontal frequency:
Vertical frequency:
Video signal level:
Sync. signal level:
Isolation:
B-18
ATA
DC powered, directly from Dräger IDS
<4 Watts
Not Isolated
Continuous
Operating:10 to +40 °C (50 to 104 °F)
Storage: –20 to +50 °C (–4 to +122 °F)
Operating:20 to 90 %, non-condensing
Storage: 10 to 95 % (with packaging)
Operating:525 to 795 mmHg (70 to 106 kPa)
Storage: 375 to 795 mmHg (50 to 106 kPa)
High resolution mode: 1024 x 768
Medium resolution mode: 800 x 600
Low resolution mode: 640 x 480
High resolution mode: 35.5 kHz
Medium resolution mode: 37.9 kHz
Low resolution mode: 31.5 kHz
High resolution mode: 87 Hz (interlaced)
Medium resolution mode: 60 Hz (non-interlaced)
Low resolution mode: 60 Hz (non-interlaced)
1 Vpp
High resolution mode: TTL (positive)
Medium resolution mode: TTL (negative)
Low resolution mode: TTL (negative)
Galvanically isolated from IDS in accordance with IEC 60601-1-1
D /D
ELTA
XL/K
ELTA APPA
VF8