Dräger Infinity Delta Instructions For Use Manual page 364

21 R
ESPIRATORY
etCO2/Flow Breathing Circuit Setup
NEONATAL
To monitor both etCO
1. Select an appropriate etCO
2. Plug the sensor into the etCO
3. Snap a Capnostat sensor onto the etCO
4. Connect the etCO
"etCO2/Flow Breathing Circuit Setup" on page 21-6. A message at the top of
the screen confirms the sensor size and its proper connection.
5. Follow procedures for etCO
21-6
M
ECHANICS
Combined etCO2/Flow Sensors
To pod
To ventilator
ADULT /PEDIATRIC
Flow Only Sensors
To ventilator
and respiratory mechanics
2
/Flow sensor to the patient breathing apparatus as shown in
2
D /D
ELTA
To patient
PEDIATRIC
ADULT /PEDIATRIC
To patient
/Flow sensor.
2
/Respiratory mechanics pod.
2
/Flow sensor.
2
mainstream setup (page 19-6).
2
XL/K
ELTA APPA
To pod
To ventilator
or
NEONATAL
To ventilator
VF8