Display Features - Dräger Infinity Delta Instructions For Use Manual

Display Features

Special features characterize the display of IBP parameter values and waveforms.
Parameter boxes vary in appearance according to whether the parameter is pulsatile or
non-pulsatile. Parameter boxes for pulsatile pressures (ART, LV, PA, RV, GP1, GP2,
and temporarily assigned labels P1a-P3d) display systolic, diastolic, and mean
pressure values.
NOTE: The monitor automatically assigns P1a-d, P2a-d and P3a-d as temporary
pressure labels when pressure transducers are initially connected. These temporary
pressure labels must be relabeled with an appropriate permanent label corresponding to
the pressure site being monitored.
NOTE: These temporary pressures are not included in graphical and tabular trends on
the monitor until they are assigned a permanent label.
A typical pulsatile pressure parameter box is shown below:
1 Systolic pressure
2 Alarm limits
3 Diastolic pressure
NOTE: Page 2-13 describes how to increase the size of the mean pressure value in the
IBP parameter box.
VF8 D /D XL/K
ELTA ELTA
4 Mean pressure
5 Parameter label
APPA
D F
ISPLAY EATURES
14-11