Power Sources (Delta/Delta Xl) - Dräger Infinity Delta Instructions For Use Manual

1 I
NTRODUCTION
MIB protocol converters – The monitor can display numeric, waveform, and
trended data generated by external monitoring devices. Dräger provides
protocol converters that translate the output from external devices into the
Medical Information Bus (MIB) protocol, using the appropriate 1073
standards (IEEE 1073.3.2 or 1073.3.1 and 1073.4.1). For more information,
see chapter 28.
R50 series recorders – Produce alarm, timed, continuous, and trend
recordings. See chapter 7, for more information about R50 and R50-N
recorders.
PCMCIA card – Allows you to transfer data, upgrade software, store setups,
download setups, and store diagnostic logs.
QRS Sync. output –Allows you to synchronize defibrillators to the patient's
heart beat during cardioversion.
Balloon pump interface – Permits interaction with a balloon pump by
providing two analog output signals (ECG and ART).

Power Sources (Delta/Delta XL)

The Delta/Delta XL monitor can be powered by the Infinity Docking Station (IDS), a
hospital grade outlet with AC adapter, or battery. In case of a line outage or
disconnected cable, the monitor automatically switches to battery power to provide
continued patient monitoring without any loss of data.
CAUTION: See the section "Safety Considerations" on page 6 in these Instructions for
Use before connecting the monitor to a power source.
1-14 D /D XL/K
ELTA ELTA APPA
VF8