Dräger Infinity Delta Instructions For Use Manual page 99

Copying data onto the memory card
1. Press the
2. Click on
3. Click on
4. Highlight
arrow shows the direction of the data flow.
5. Go to step 7 if the patient's name and ID appear in both the upper and lower
windows.
or
Click on
if the upper window instructs you to enter a patient's name or ID.
A banner informs you that the copy is in process. A message appears when the
copy is successfully completed.
6. Remove the memory card from the source monitor.
Copying patient data from the card to the destination monitor
1. Insert the memory card in the destination monitor.
2. Press the
3. Click on
4. Click on
of the data flow is from monitor to card.
5. Click on
the following message appears: Current data will be replaced. Copy data to
Monitor?
If the date and time are not correct, the following messages may appear to
indicate synchronization of monitors is needed:
Some data on the card is ahead of the monitor's time. That data cannot be
copied to the monitor.
Some data on the card is older than the monitor can accept. That data cannot
be copied to the monitor.
6. Click
Yes
Copy Patient Data menu.
VF8 D
fixed key on the source monitor.
Menu
.
Admit/Discharge
.
Copy Patient Data
and click
Copy To Card
and follow standard data entry procedures (page 4-2)
Patient Admit
fixed key on the destination monitor.
Menu
.
Admit/Discharge
. The large arrow now indicates that the direction
Copy Patient Data
. If the date and time are correct on both monitors,
Move To Monitor
to initiate the transfer, or
/D XL/K
ELTA ELTA
T
RANSFERRING
On the right side of the screen, a large
.
to cancel the transfer and return to the
No
APPA
P D
ATIENT ATA
4-5