Sidestream (Adult And Pediatric Patients Only) - Dräger Infinity Delta Instructions For Use Manual

Infinity delta series patient monitoring device
Hide thumbs Also See for Infinity Delta:
Table of Contents

Advertisement

Sidestream (Adult and Pediatric Patients Only)

Sidestream monitoring is appropriate for non-intubated patients or for intubated
patients who are breathing independently. Sidestream monitoring should not be used
on neonates and is therefore disabled in Neonatal mode.
A pump in the etCO
a nasal sampling cannula. You cannot measure flow, volume or pressure via
sidestream monitoring.
Sidestream Monitoring Setup
1. Click on the etCO
2. Click on
3. Click on
4. Make sure the sidestream pump in the etCO
feel suction at the input port.
5. Select a sidestream airway adapter. Make sure the windows are clean and dry.
Clean or replace the adapter if necessary.
6. Use the sidestream sampling tubing to connect the airway adapter to the input
connector on the face of the etCO
NAFION
NOTE: For a complete list of etCO
see page C-23.
VF8
D
device samples the patient's inspired and expired air as it passes
2
parameter box to access the setup menu.
2
Measurement Mode
.
Side
®
dehumidification tubing set.
/D
XL/K
ELTA
ELTA
.
device turns on, and that you
2
module or pod. (Dräger recommends the
2
accessories provided by Dräger for this product,
2
APPA
S
M
AMPLING
ETHODS
19-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infinity delta xlInfinity kappa

Table of Contents