Dräger Infinity Delta Instructions For Use Manual page 590

C A O
PPROVED
Network Patch Cables
NOTE: The Infinity network patch cables are not recommended for connecting the
MIB II protocol converter to the IDS or the Infinity Kappa monitor. The recommended
patch cables can be found under the section entitled "External Device Interface" on
page C-6.
Patch cable, 1.2 m
Shielded cable to connect the IDS or a monitor to a net-
work wallplate
Patch cable, 2.4 m
Shielded cable to connect the IDS or a monitorto a network
wallplate
Patch cable, 4.9 m
Shielded cable to connect the IDS or a monitor to a net-
work wallplate
Patch cable, 20 m
Shielded cable to connect the IDS or a monitor to a net-
work wallplate; comes with extra connector for field termi-
nation
R50 Recorders and Recorder Cables
R50 recorder (includes paper)
R50-N recorder (includes paper and a mounting plate)
Recording paper, 10 rolls
R50 recorder cables, IDS-interface plate, 1.5 m
Cable to connect an R50 Recorder to the IDS
(requires interface plate)
Recorder cable, IDS-R50, 3 m
Cable to connect an R50 recorder to a IDS
(interface plate not required)
Recorder cable, 0.6 m
Cable to connect an R50 recorder to a monitor equipped
with an interface plate
External Device Interface
MIB II protocol converter
MIB connection cable, 3 m
Cable to connect the MIB protocol converter to an IDS
MIB cable, Abbott Oximetrix
MIB cable, Abbott Q2/Q2+ Continuous Cardiac Output/SvO
MIB cable, AVL Opti CCA
C-6
A
PTIONS AND CCESSORIES
3
D /D
ELTA
2
XL/K
ELTA APPA
4726373
4726381
4726399
4725557
5952630
5740068
4711201
4721770
4313560
4313586
7256931
5589093
5742981
7493344
5742999
VF8