Dräger Infinity Delta Instructions For Use Manual page 57

The Main Menu
Menu Item Description
MultiGas Displays a combined O
Parameter parameter box.
NOTE: You can also display or cancel the
MultiGas Parameter box from the O
setup menu (see chapter 23, for more
information).
Split Screen Reserves a portion of the main screen for
display of trend graphs and ventilation
loops.
EEG Sets number of EEG waveforms
Channels displayed.
Display Options
This submenu allows you to access and modify waveforms and other display features by
configuring the following functions.
Monitoring Determines the waveform speed. The
Sweep higher the sweep speed the quicker the
Speed waveforms are move across the screen.
Respiratory Allows you to set the sweep speed for the
Sweep respiration waveform independently of
Speed other parameters.
Pressure Displays up to 4 overlapping IBP
Overlap waveforms in a single oversized channel.
Overlapped waveforms share a common
zero point, but each waveform retains the
original scale configuration (see page 14-
14).
Pressure Displays pressure waveforms with a
Common common scale, making it easier to
Scale compare them.
Monitor Sets the brightness of the monitor screen. Click on Auto (ambient light), 20, 40,
Brightness
SC 9015 Sets the brightness of the SC 9015.
Brightness
Help Line Shows a contextual help line at bottom of
Display the menu.
Parameter Displays a unit of measure in the
Units Display parameter boxes.
VF8 D
/Agent/N
2
/D XL/K
ELTA ELTA
C
ONFIGURING THE
Available Settings
O To display the MultiGas parameter
2
box:
• Click on MultiGas Parameter.
• Click again to toggle ON or OFF.
2
Click on one of the following:
• OFF
• 60 Min Trends
• 10 Min Trends
• Ventilation
• Click on 1, 2, 3, or 4.
Click on 6.25, 12.5, 25, or 50 mm/s
Click on 6.25, 12.5, 25, or 50 mm/s
• Select ON to display IBP waveforms
in overlapping format.
• Select OFF to cancel display of
waveforms in overlapping format.
Click on 5, 10, 15, 20, 25, 30, 40, 50,
75, 100, 150, 200, 250, 300 mmHg, or
OFF.
60, 80, or 100%.
• Select ON to display a help line.
• Select OFF to cancel the display of a
help line.
• Select ON to display units.
• Select OFF to cancel the display of
units.
APPA
M
ONITOR
2-7