Dräger Infinity Delta Instructions For Use Manual page 63

Quick Reference Table – OR Menu
OR Function Description
OR Activates the OR menu functions.
NOTE: This function is a locked
option. It is installed at the time of
purchase from perioperative care unit
or it can be installed locally by
DrägerService or your hospital's
technical personnel.
Cardiac Bypass Configures the monitor for use during
cardiac surgery.
NBP Chime Controls whether an attention tone
sounds upon completion of an NBP
measurement, see chapter 13 for
more information).
Alarm Volume Sets the alarm volume.
Large IBP-Mean Determines the relative size of the
Display mean pressure value in invasive
pressure parameter boxes.
Attention Tone Sets the attention tone volume
Volume
HR Source Derives heart rate from various
sources (see page 8-23).
NOTE: This function is useful during
electrosurgery when artifact makes
the ECG channel unavailable.
Filter Determines sensitivity to noise,
artifact, and other signal distortion
(see page 8-20).
NOTE: The ESU setting automatically
disables pacer detection.
ARR Monitoring Determines the number of arrhythmia
events you can monitor
(see page 9-5).
VF8 D
The OR menu
/D XL/K
ELTA ELTA
Settings
• ON – OR functions are enabled.
• OFF – The monitor reverts to normal
functions; The settings Cardiac
Bypass and NBP Chime are
ghosted.
• ON – Suspends all patient-
monitoring alarms (except ventilator
alarms), NBP interval
measurements, and arrhythmia
detection.
• OFF – The monitor reverts to normal
functions.
• ON – Attention tone sounds when
NBP measurement is complete.
• OFF – No tone sounds when NBP
measurement is complete.
• 10 - 100% in increments of 10
• OFF
• ON – The mean IBP value is larger
than the systolic and diastolic IBP
values.
• OFF – The systolic, diastolic and
mean IBP values are the same size.
• Off, 5, 10 - 100% in increments of 10
Click on one of the following settings to
determine the Heart Rate source:
• ECG
• ART
• SpO2
• AUTO
• OFF
• ESU
• Monitor
• OFF
• Basic
• Full
APPA
S M
PECIALTY ENUS
2-13