Overview - Dräger Infinity Delta Instructions For Use Manual

Ports and outlets are clearly marked on the front of the etCO
these labels as a guide when connecting the pod or module to the monitor and
peripherals..
Slide into slot on rear of monitor until
the module rests securely.
1 Sidestream output port
2
Sidestream input port
3
Capnostat sensor cable
VF8 D /D XL/K
ELTA ELTA
module and pods. Use
2
Plug one end of connector cable into
PodCom connector on left side of
monitor. Plug the other end into the pod.
1 Sidestream input port
2 Sidestream output port
3 Capnostat sensor cable
4
PodComm connection (to
monitor)
APPA
O
VERVIEW
19-3