Remote Authentication/Directory Service - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

do not set remote authentication, the machine uses the user ID and passcode of the

machine for authentication.

SMTP AUTH Login Name

Enter the user name for verification purposes at the SMTP server with up to 64 characters.

SMTP AUTH Password

Enter the password for verification purposes at the SMTP server. Up to 64 single-byte

characters are allowed.

Remote Authentication/Directory Service

You can make the settings for the remote authentication server and directory service.

Authentication System Setup

Authentication System

Allows you to select the authentication system from [Kerberos (Windows 2000)], [Kerberos

(Solaris)], [LDAP], [SMB], and [Authentication Agent].

After you change the authentication system, folders and job flow sheets used with the

previous authentication system are not deleted automatically. If these folders or job flow

sheets are no longer needed, delete them from the machine. If the same user IDs are also

used on the new authentication system, folders and job flow sheets can be used by the

Server Response Time-Out

Set the server time-out response between 1 and 75 seconds in 1 second increments.

Search Time-Out

Set the user information search time-out between 1 and 120 seconds in 1 second

Kerberos Server Settings

Configure the Kerberos Servers 1 to 5.

The settings in [Kerberos Server 1 (Default)] will be the default settings for authentication.

Primary Server Name/Address

Enter the primary server name or IP address.

If you do not set the password, leave the text boxes blank and select [Save].

DocuCentre series models can only support the services associated with searches for Address Book of "LDAP

Server/Directory Service Settings" (P.253).

This feature is available on the ApeosPort series models only.

For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.

For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a

hexadecimal value.