Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 819

Parameter Item No.
Number of holes 167
Folding/180 168
degree rotation
Emulation target 169
printer
Pen attributes 800-815 (Pen
width) (No. 0-
No.15)
850-865 (Line
end shape)
(No. 0-No.15)
Select the number of punch holes.
[0] (Default) : 2 holes
[1]: 3 holes
[2]: 4 holes
Specify the Z fold half sheet and whether to rotate landscape documents in
180 degrees.
[0] (Default): None
[1]: Z fold half sheet (Right bind/Top bind)
[2]: Z fold half sheet (Left bind/Bottom bind)
[3]: None (180 degrees rotation)
[4]: Z fold half sheet (Right bind/Top bind, 180 degrees rotation)
[5]: Z fold half sheet (Left bind/Bottom bind, 180 degrees rotation)
Select the machine to emulate.
[0] (Default): HP750
[1]: FX4036
Set the width (thickness of the line) of the 16 pens (No. 00 to 15). You can set
the width from 0.0 to 25.5 mm in 0.1 mm increments. No. 00 denotes Item
No. 800.
[0] - [255] (Default: 3) : 0 to 25.5 mm
Note
If the image is reduced by concern with the relationship between [Document size]
and [Paper size] settings, the pen width is reduced accordingly to 0.1 mm at the
smallest.
The width of the line gets thick symmetrically with respect to the center of the line.
If the width is set to 0.0 mm, nothing is plotted.
Set the line end shape of the 16 pens (No. 00 to 15). No. 00 denotes Item No.
850.
[0] (Default): Cut
[1]: Round
[2]: Rectangular
[Cut]
: specified coordinate
[Round]
: specified coordinate
[Rectangular]
: specified coordinate
HP-GL/2 Emulation
Value
16
819