Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 341

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Select any item, and set it.

Select [Close].

Enter a user ID to use the machine. Up to 32 single-byte characters are allowed.

Set a user name. Up to 32 single-byte characters are allowed.

For information about how to enter characters, refer to "Entering Text" (P.46).

Set a passcode. Setting a passcode is strongly recommended for security. Set a passcode

from 4 to 12 digits.

When [Passcode Entry for Control Panel Login] is set to [On], a passcode entry is required upon user

authentication.

For information on how to change your passcode later, refer to "Changing Passcode" (P.492).

E-mail Address

Enter an e-mail address with up to 128 characters. The address set here will be set as [From]

under [E-mail].

For information about how to enter characters, refer to "Entering Text" (P.46).

Device Access

Set whether to allow the machine use.

Allows the machine use. When the smart card reader is connected, you can select the

settings for each Login Type.

Prohibits the machine use.

Service Access

You can place restrictions on the use and the maximum number of allowed pages for each

of the Copy, Fax, Scan, and Print services.

Select [Service Access].