Step 3 Configuration On The Computer - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Scanner Environment Settings
obtained automatically or manual configuration is preferred, confirm the settings of an IP
address, a subnet mask, and a gateway address.
Reference
4
Select [Close] repeatedly until the [Tools] screen is displayed.
5
Select [Close].
Note
6
Print a configuration report to confirm that the SMB Client port or FTP client is enabled and
that TCP/IP is set up correctly.
Reference

Step 3 Configuration on the Computer

Create a destination folder on your computer.
Using FTP
Create a destination folder on the server where you login and set write rights on the folder.
Using SMB
Create a shared folder on your computer and set the write rights on the shared folder.
Note
9
404
For information on how to set an IP address, refer to "Protocol Settings" (P.239).
Rebooting the machine may be required depending on the settings. When a message appears on the screen,
follow the message and reboot the machine.
For information on how to print a configuration report, refer to "Print Reports" (P.131).
To use SMB on Mac OS X, set [File Sharing] to [On] in the [Service] tab of [Sharing] under [System
Preferences].