Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 257

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Attribute Type of Custom Items 1, 2, and 3

Set the LDAP attribute type of custom items 1 to 3. In addition to [Attribute Type of Name]

and [Attribute Type of E-mail Address], you can assign user attributes registered on the

LDAP server for a search. Up to 32 characters are allowed.

Attribute Name of Custom Items 1, 2, and 3

Set the attribute names assigned to custom items 1 to 3. Up to 16 single-byte characters

are allowed.

Attribute Type of Certificate

Set the certificate attribute type. Select and enter the field name to use as a certificate

from among the user information registered on the LDAP server. Up to 32 single-byte

characters are allowed.

For Windows, enter "userCertificate;binary" for an attribute name used as certificate

information. The information is used as an S/MIME certificate when you specify an address

using the directory service to encrypt e-mail transmission by S/MIME.

To encrypt communications using this feature, a trusted root certificate authority and all intermediate

certificate authorities that are registered in the path of a certificate to use must be registered.

Maximum Number of Search Results

Set a maximum number of address to display from search results from 5 to 100. If the

search results exceed the maximum, the search stops at the maximum number set.

The default value is 50.

Search Time-Out

Select whether or not to set a search time-out. Set the value from 5 to 120 seconds in 1

second increments.

SMB Server Settings

Set the following items to use SMB server as a remote authentication server.

SMB Server Setup

Select the server specification method from [By Domain Name] and [By Domain & Server

Names/IP Address].

According to the option you selected here, set [Domain Name] and [Server Name/IP

Address] for SMB servers 1 to 5 respectively.

The setting for SMB server 1 is used as the default setting for authentication.

Enter the domain name of the server. Up to 64 characters are allowed.

This setting is mandatory regardless of the SMB server specification method selected for

[SMB Server Setup].

Use the NetBIOS or Active Directory domain name for the domain name.

Connectivity & Network Setup