Optional Components - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Appendix

Optional Components

The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
16
744
Product Name
Large Size UI Kit
Large Size UI Installation Kit A kit to set the Large Size UI to the machine.
Large Size UI Installation Kit
2
Side Tray
Stand
2 Tray Module
Finisher A2
Finisher B1
Booklet Maker Unit for
Finisher B1
2/4 Hole Punch Kit for
Finisher B1
US 2/3 Hole Punch Kit for
Finisher B1
C3 Finisher
C3 Finisher with Booklet
Maker
Transport Unit H3
C3 Finisher Punch Unit
2H/4H
A control panel with 10.4 inch SVGA color touch screen.
Note
For ApeosPort-VI C5571/C4471/C3371/C3370/C2271, DocuCentre-
VI C5571/C4471/C3371/C3370/C2271
A kit to set the Large Size UI to the machine.
Note
For ApeosPort-VI C7771/C6671, DocuCentre-VI C7771/C6671
Delivers output face up.
Note
For China, Taiwan, and Korea
A stand installed to the machine.
Note
For China
Module with two paper trays.
Note
For China
Staples output sheets.
Staples output sheets.
Staples output sheets. Also folds output sheets in half or staples
them.
2/4 hole-punches output sheets.
Note
Finisher B1 is required.
2/3 hole-punches output sheets.
Note
Finisher B1 is required.
Staples output sheets.
Staples output sheets. Also folds output sheets in half or staples
them.
Transfers paper output to the C3 Finisher or C3 Finisher with
Booklet Maker.
Note
Required to install C3 Finisher or C3 Finisher with Booklet Maker.
2/4 hole-punches output sheets.
Note
C3 Finisher or C3 Finisher with Booklet Maker is required.
Description