Replacing Stamp (For Duplex Automatic Document Feeder C1-Pc) - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

2
Stick the supplied pin into the old stamp cartridge, and pull it straight out of the machine.
Note
If only the sponge part of the stamp cartridge is removed, make sure of removing the bottom part of the
cartridge.
3
Insert the new stamp cartridge.
4
Close the Side 2 scanner, and then close the document feeder gently.

Replacing Stamp (for Duplex Automatic Document Feeder C1-PC)

If the machine offers the Fax service and the Stamp Kit SP-H (optional) is installed, replace
the stamp cartridge when stamp impressions start to fade.
Important
Do not touch the ink pad of the stamp cartridge as the ink may be adhered to the pad. If it comes into
contact with your skin, wash immediately.
Problems caused by using consumables not recommended by Fuji Xerox are not covered by the maintenance
service contract.
Before using consumables, carefully read instructions and precautions on their packages.
Note
We recommend always keeping spare consumables/periodic replacement parts in stock.
To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
Replacing Consumables
105
3