Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 766

Appendix
1
Select [Single Fold], and then select [Change Settings].
2
Specify [Sheets to be folded], and then select [Sample Printout].
3
Select the tray in which you loaded paper, and press the <Start> button.
The sample is printed.
4
Select [Close].
5
Check the sample printout, measuring the misaligned amounts.
6
Select [Long at Left] or [Long at Right], and enter the value you measured in the step 5 in
[Value A Before Adjustment].
16
7
Select [Adjust].
8
Select [Sample Printout] again.
766