Fax Service Settings; Screen Defaults - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Fax Service Settings

In [Fax Service Settings], you can configure settings related to the Fax service.

This feature does not appear for some models. An optional component is required. The items displayed on

the screen vary depending on the optional components installed. For more information, contact our

Customer Support Center.

You can register new address book entries in [Add Address Book Entry] under [Setup]. For more information,

refer to "Add Address Book Entry" (P.328).

On the [Tools] screen, select [System Settings] > [Fax Service Settings].

For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.156).

Select an item to set or change.

You can set items displayed on the [Fax/Internet Fax] screen.

Fax Screen Default

Set the default screen that appears when the [Fax/Internet Fax] screen is selected in the

Services Home screen.

Select from [Fax Tab] or [Address Book].

1st Tab - Features Allocation

Set the features that appear on the [Fax/Internet Fax] screen.

Feature in 2nd to 4th Column

You can set the features that appear in the second to the fourth column of the lower part

on the [Fax/Internet Fax] screen.

Select the item to be displayed from [Not Selected], [2 Sided Faxing], [Original Type],

[Resolution], [Confirmation Options], [Starting Rate], [Transmission Header], [Mixed Size

Originals], and [Reduce / Enlarge].

[2 Sided Faxing] and [Mixed Size Originals] are not displayed on the screen for the models

without the document feeder.

Reduce / Enlarge - Button 3 - 5

This item can be set when [Reduce/Enlarge] is selected in [Feature in 2nd to 4th Column].

You can set the magnifications displayed as [Preset %] which are displayed under [Reduce/

Enlarge] in the [Layout Adjustment] screen. You can assign any magnification to the

Reduce/Enlarge - Button 3 - 5.

Transmission Screen

Set whether or not to display transmission status during transmission.

Fax Service Settings