Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 640

Problem Solving
15
640
Error Code
033-725 [Cause] The hard disk is full.
[Remedy] Delete unnecessary data from the hard disk to free up disk
space.
033-726 [Cause] The received document was printed with 1 sided printing,
because 2 sided printing is not available for mixed sized
documents.
[Remedy] No measure is required.
033-728 [Cause] The auto print formatting of the received fax document was
interrupted by a manual print operation.
[Remedy] No measure is required. The machine will automatically start
the auto print job after manual printing completes.
033-731 [Cause]
The printing of the received fax document was interrupted.
[Remedy] The auto print processing of the received fax document was
interrupted by a manual print operation. No measure is
required.
033-732 [Cause] An error occurred while connecting to the EP system.
[Remedy] This is an error occurring during maintenance work by Fuji
Xerox. No measure is required.
033-733
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
033-734 [Cause] Because a report job was instructed while preparing to print a
received fax, the printing of the received fax is temporarily
suspended.
[Remedy] No measure is required.
033-735 [Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
033-736 [Cause] The forwarding job was interrupted because the data volume
exceeded the upper limit.
[Remedy] No measure is required.
033-737 [Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
033-738 [Cause] Received abnormal JBIG data.
[Remedy] No measure is required.
033-740 [Cause] The printing of the received fax document was interrupted.
[Remedy] No measure is required.
033-741
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
Cause and Remedy