Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 500

Problem Solving
15
500
Symptom
Paper is often Is the paper loaded
jammed or correctly in the tray?
wrinkled.
Is the paper tray inserted
correctly?
Is the paper damp?
Is the paper curled?
Are the paper and paper
tray settings correct?
Are any torn pieces of
paper remaining or is there
a foreign object in the
machine?
Is non-standard paper
loaded in the tray?
Is paper exceeding the
maximum fill line in the
tray?
Are the paper guides set
correctly?
Is the image nearly the
same size as the paper?
Is the paper finely cut out?
Cause
Load the paper correctly.
Reference
Refer to "Loading Paper" (P.56).
Firmly push in the paper tray until it stops
to insert it correctly.
Reference
Refer to "Loading Paper" (P.56).
Replace the paper with a new one.
Reference
Refer to "Loading Paper" (P.56).
Turn over the paper in the tray, or replace
the paper with a new one.
Reference
Refer to "Loading Paper" (P.56).
Correctly set the paper and paper trays to
correspond to the paper.
Reference
Refer to "Changing the Paper Settings" (P.73).
Open the cover of the machine or slide
out the paper tray to remove the torn
pieces or the foreign object.
Reference
Refer to "Paper Jams" (P.666) or "Loading Paper"
(P.56).
Replace with paper that meets machine
specifications.
Reference
Refer to "Paper Types" (P.48) or "Loading Paper"
(P.56).
Load paper in the paper tray so that it
does not exceed the maximum fill line.
Reference
Refer to "Loading Paper" (P.56).
Load the paper correctly, and align
thepaper guides to the paper.
Reference
Refer to "Loading Paper" (P.56)or "Changing the
Paper Size" (P.66).
Increase the edge erase widths.
Reference
For more information, refer to "Copy" in the User
Guide when you copying, or to the help of the
print driver when printing.
Some types of paper may not be cut out
finely. Load the paper after fanning it
well.
Remedy