Loading Paper In Tray 3 (When Tandem Tray Module Is Installed) - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Paper and Other Media
2
Load and align the edge of the paper against the left edge of the tray, with the side to be
copied or printed on facing up.
Important
2
Note
3
Push the tray in gently until it stops.
Important

Loading Paper in Tray 3 (When Tandem Tray Module is Installed)

The following describes the procedure for loading paper in Tray 3 when the Tandem Tray
Module is installed.
When the machine runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the displayed instructions. Copying or printing
automatically resumes when paper is added.
Note
Reference
58
Do not load paper above the maximum fill line ("MAX" in the right figure). It may cause paper jams or
machine malfunction.
Do not place any paper or objects in the empty space on the right side of Trays 1 to 4. It may cause paper
jams or machine malfunction.
When using punched paper, load the punched paper as shown in the illustration on the right.
When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine malfunction.
Fan the paper well before loading paper in a tray. It prevents paper from sticking to each other and reduces
paper jams.
For information on changing the paper size and orientation, refer to "Changing the Paper Size for Tray 3 (When Tandem Tray
Module is Installed)" (P.67).