Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 643

Error Code
"045-001" - "046-999"
Error Code
"047-001" - "047-999"
Error Code
043-345 [Cause] An error occurred in the machine.
043-346
[Remedy] Turn the machine off and then on, and then execute the
043-347
operation again. If the error still is not resolved, contact our
043-348 Customer Support Center.
043-349
043-351
043-352
043-353
043-354
043-355
043-356
044-312
[Cause] An error occurred in the machine.
044-313
[Remedy] Switch off the machine power, make sure that the touch screen
044-314
is blank, and then switch on the machine power. If the error still
044-329 is not resolved, contact our Customer Support Center.
044-389
045-310 [Cause] An error occurred.
045-311
[Remedy] Switch off the machine power, make sure that the touch screen
045-359
is blank, and then switch on the machine power. If the same
045-368 message is displayed again, contact our Customer Support
Center.
045-369
045-370
045-371
045-377
045-382
045-396 [Cause] An error occurred in the machine.
045-398
[Remedy] Switch off the machine power, make sure that the touch screen
045-399
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
047-211 [Cause] An error occurred in the Offset Stacking Unit.
047-212
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
047-213
[Cause] Detected the installation of a finisher of a different type than
expected.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Cause and Remedy
Cause and Remedy
Cause and Remedy
Error Code
15
643