Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 64

Paper and Other Media
1
Pull out Tray 6 until it stops.
2
Important
2
Load and align the edge of the paper against the right edge of the tray with the side to be
copied or printed on facing down.
Important
Note
64
CAUTION
Make sure to pull out the tray slowly. If the tray is pulled out with too
much force, the tray might possibly hit your knees or other parts of your
body and cause injuries.
While the machine is processing a job, do not pull out the tray that the job uses.
Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper jams or any other
troubles. First, remove the remaining paper from the tray, and then load the new stack of paper.
Do not load paper above the maximum fill line ("MAX" in the right figure). It may cause paper jams or
machine malfunction.
When using punched paper, load the punched paper as shown in the illustration on the right.