Authentication - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Tools
System Administrator's Passcode
Set the passcode for the system administrator.
Setting a passcode is strongly recommended to enhance security.
Note
The system administrator's passcode set here is used when [Passcode Entry for Control
Panel Login] is set to [On] under [Authentication/Security Settings] > [Authentication] >
[Passcode Policy].
Set the passcode after setting the system administrator's user ID. You can set the passcode
from 4 to 12 characters.
Reference
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
5
3
Enter a new passcode (4 to 12 digits) using the keyboard displayed, and then select [Save].
Note
4
Select [Retype Passcode], enter the same passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.

Authentication

You can set the authentication settings.
Login Type
Allows you to select a type of authentication.
No Login Required
Does not use the Authentication feature.
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note
352
The default of the system administrator's passcode is "x-admin".
For more information about [Passcode Entry for Control Panel Login], refer to "Passcode Policy" (P.358).
If no passcode is set, leave the text boxes blank and select [Save].
When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login] is displayed at
the lower left of the Services Home screen.