Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 93

4
Pinch both sides of the empty staple case with your fingers (1), and remove the staple case
from the cartridge (2).
5
Insert the front side of the new staple case into the staple cartridge (1), and then push the
rear side into the cartridge (2).
6
Push the staple cartridge into the finisher until it clicks into place.
7
Close the finisher front cover.
Note
If the front cover is not closed completely, a message appears and the machine will remain paused.
Replacing Consumables
93
3