Step 3 Configuration On The Computer - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Printer Environment Settings

Set an IP address and the other addresses.

Skip this step if an IP address is already set.

If DHCP or BOOTP is available in your environment, configure the method for obtaining the

address. The configuration of an IP address, a subnet mask, and a gateway address is not

Enable the Bonjour port, and the Discovery feature that automatically detects printers on

the IP network can be enabled.

1) Select [Connectivity & Network Setup].

2) Select [Port Settings].

3) Select [Bonjour], and then select [Change Settings].

4) Select [Port Status], and then select [Change Settings].

5) Select [Enabled], and then select [Save].

Select [Close] repeatedly until the [Tools] screen is displayed.

Select [Close].

Print a configuration report to confirm that the LPD port is enabled and that TCP/IP is set

up correctly.

Configure other LPD or Port9100 settings as necessary.

Step 3 Configuration on the Computer

To print from the machine, you need to install a print driver on your computer.

For information on how to set an IP address, refer to "Protocol Settings" (P.239).

To print from a printer detected by Bonjour, the LPD port must be enabled in advance.

Rebooting the machine may be required depending on the settings. When a message displayed on the

screen, follow the message and reboot the machine.

For information on how to print a configuration report, refer to "Print Reports" (P.131).

For information on how to set up the LPD port or Port9100, refer to "CentreWare Internet Services Setting Items" (P.381).

For information on the supported operating systems, refer to "Supported Operating Systems" (P.375).

For information on the driver installation procedures, refer to the Media Information contained in the Media

(Software/Product Manual).

You can print via TCP/IP (LPD) from a Macintosh computer for Mac OS X. For information on the installation

procedures of the print driver for Mac OS X, refer to the manual for Mac contained in the Media provided with

For information on the installation procedures of Adobe PostScript 3 Kit (optional), refer to the manual for

Mac contained in the media provided with the driver.