The Copy Result Is Not What Was Expected - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Problem Solving

The Copy Result is Not What was Expected

If the copy result is not what was expected, identify the symptom in the following table to
perform the remedy.
15
510
Symptom
The copy is dirty. The document glass or the
document cover is soiled.
The document is a
transparent type such as a
transparency film.
The document is colored,
rough, or a blueprint.
The document is glossy
printing paper.
The copy is too The setting for [Lighten/
dark or light. Darken] is inappropriate for
the document.
The setting for [Original Type]
is inappropriate for the
document.
The color of the Is the color calibration
document and of incorrect?
the copy differ.
The document type selected is
not suitable.
The image quality selected is
unsuitable for the document.
The copy is Paper is misaligned in the
slightly tray.
misaligned.
Cause
Clean the document glass or the document
cover.
Reference
Refer to "Cleaning Document Cover and Document
Glass" (P.111) .
If the document is transparent, dirt on the
document cover may be copied. Place a white
sheet of paper on top of the document when
copying.
The paper's background color is copied.
Adjust the copy density or image quality, or
specify [Suppress Background].
Glossy printing paper easily sticks to the
document glass, and shadows are sometimes
copied, soiling the image. Place a
transparency film under the document when
copying.
Adjust the copy density.
Reference
Refer to "Copy" > "Image Quality" in the User Guide.
Copy black text. If the printout is too light,
select [Text] for [Original Type].
Reference
Refer to "Copy" > "Image Quality" in the User Guide.
Execute auto calibration.
Reference
Refer to "Executing Calibration" (P.117) and "Executing
2 Sided Color Scanning Calibration" (P.121).
Set the suitable value for [Original Type].
Reference
Refer to "Copy" > "Image Quality" > "Original Type
(Selecting the Document Type)" in the User Guide.
Copy black text. If the printout is too light,
select [Text] for [Original Type].
Reference
Refer to "Copy" > "Image Quality" in the User Guide.
Align the paper edges, and adjust them to the
tray's top corners to reload the paper.
Reference
Refer to "Loading Paper" (P.56).
Remedy