Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 829

If the document size < paper size, it plots at the same scale (100%).
Document
Size
If the origin position of the plotting position is Layout, the document is placed and drawn in
the center.
If the origin position is bottom left or center, the origin of the document and the paper are
aligned and drawn.
If the Document Size is Auto and the Scaling Mode is ACA
The hard clip setting is inactive. The hard clip area is always the advanced hard clip area.
The scaling factor is determined according to the ACA and the paper size. The range for the
ACA for each paper size is as follows:
Paper
Size
A3
A4
A5
B4
B5
The maximum scaling factor is 210% of the advanced hard clip area for each paper size
and the minimum scaling factor is 22.5%.
Examples of Combinations of Each Function
The following are examples showing the print results that can be achieved by combining
various functions.
Paper Size A3
A0 35
A1 50
A2 71
A3 100
A4 100
A5 100
0 Degrees
Min Max
Value Value
P2x - P2y - P2x -
P1x P1y P1x
7829 5485 73075
5485 3828 51200
3828 2648 35733
6762 4723 63120
4723 3297 44088
A4 A5
25 100
35 25
50 35
71 50
100 71
100 100
90 Degrees
Min
Value
P2y - P2x - P2y -
P1y P1x P1y
51200 5485 7829
35733 3828 5485
24720 2648 3828
44088 4723 6762
30773 3297 4723
HP-GL/2 Emulation
B4 B5
31 100
43 31
61 43
87 61
100 87
100 100
Unit: Percent (%)
Max
Value
P2x - P2y -
P1x P1y
51200 73075
35733 51200
44088 35733
44088 63120
30773 44088
Unit: Plotter Unit
829
16