Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 816

Appendix
Parameter
Paper tray
Coordinate
rotation
Color mode
Extended Settings
Parameter
Auto layout
Active palette
No. of prints
Output
destination
2 sided printing
16
Alphanumeric
fonts
816
Item No.
103 Sets the paper tray to be used for printing.
[0] (Default): Auto
[1]: Tray1
[2]: Tray2
[3]: Tray3
[4]: Tray4
[5]: Tray5
[6]: Tray6 (HCF B1)
Important
When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the size of
paper loaded in the tray, and thus [Paper size] cannot be set.
Note
When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1
Tray 4
different orientations, feeding of the paper loaded in the landscape orientation is
prioritized.
104 Sets the paper orientation for printing.
[0] (Default) : 0 degree
[1]: 90 degree
105 Sets the color mode.
[0] : Color
[1] (Default): Grayscale
[2] : Black pen
Item No.
106 Selects whether to perform auto layout of the document or not.
[0] (Default): ON
[1]: OFF
107 Selects whether to use a pen specified by command or set on the panel.
[0] (Default): Command
[1]: Panel
108 Sets the number of copy to be printed.
[1] - [250] (Default: 1) : 1 - 250
109 Sets the output tray for the printouts.
[0] (Default) : Center Tray - Lower
[1] : Side Tray
[2] : Center Tray - Upper (optional)
[80] : Right Middle Tray (optional)
[81] : Right Top Tray (optional)
110 Sets 2 sided printing.
[0] (Default) : None
[1] : Head to head
[2] : Head to toe
112 Sets the font for single-byte characters.
Reference
For more information on fonts, refer to "Internal Fonts" (P.742).
[0] (Default) : Stroke
[1] : Roman
[2] : Sans serif
Value
Tray 6. If paper of the same size is loaded in multiple trays but in
Value
Tray 2 Tray 3