Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 811

Parameter Item No.
Binding 217
Line termination 218
Default custom 219 (Short
paper size edge)
220 (Long
edge)
Print Quantity 221
Setup
Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the edge to
be bound. Unifies the leading direction of the image on the front and rear sides
of the paper at the long edge of the paper for LEF and at the short edge of the
paper for SEF.
[0] (Default): LEF
[1]: SEF
Sets line termination processing.
[0] (Default): Off
[1]: Add-LF (Appends an LF to CR)
[2]: Add-CR (Appends a CR to LF and FF)
[3]: CR-XX (Appends a CR to LF and FF, and LF to CR)
Specifies the default custom paper size.
[2100] (Default short-edge value) : 210.0 mm
[2970] (Default long-edge value) : 297.0 mm
[0] - [9999]: 0 to 999.9 mm
Sets the method for specifying the number of copies to print.
[0]: Protocol
[1]: Panel
[2](Default): Command
Value
PCL Emulation
16
811