Create Fax Group Recipients - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Select [Save].

Internet Fax Profile

Set the format of the Internet fax profile.

A profile is specified to restrict attribute information such as image resolution and paper

size for transmissions between Internet Fax-enabled machines.

The Internet fax standard profile. For documents larger than A4, the size is automatically

reduced to A4 when transmission.

Select this profile when you specify [Superfine] for [Resolution] or when you send A3 or B4

Select this profile for sending documents in JBIG.

When the [Delete Entry] Button is Selected

Selecting this button deletes all the information registered for the address selected. To

delete all information registered, select [Delete].

Deleted information cannot be restored.

Create Fax Group Recipients

You can register addresses for broadcast transmission as a group. Each group can include

up to 20 address numbers. The maximum number of groups that can be registered is 50.

Note that recipients to be added to a group must be registered in the speed dials on the

Address Book.

Even when the speed dial number of fax recipients (address book entries) are included in a group, the

machine does not send faxes to the recipients if their address types are set to [E-mail] or [Server].

You cannot include a group in another group.

You can use wildcards for specifying the numbers in the last one or two digits as shown in the following

001*:Specifies the 10 addresses with address numbers 010 to 019.

****:Specifies all address numbers.

Select [Create Fax Group Recipients].