Reduce/Enlarge Presets; Original Size Defaults - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Select [Save].

Output Destination Setup

In [Output Destination Setup], you can set the output destination for each receiving line.

Fax Received - Line 1 to 3

Specify output tray for each line.

Fax Received - SIP

Specify output tray for IP fax (SIP).

Public Folder Printed Files

Specifies output tray for public folder for polling.

Reduce/Enlarge Presets

You can set the magnifications displayed as [Preset %] which are displayed under [Reduce/

Enlarge] in the [Layout Adjustment] screen. You can assign any magnification to the

Reduce/Enlarge Preset buttons other than [100%] and [Auto %].

You can select a ratio from preset ratios.

You can specify a magnification from 50 to 400% in 1% increments.

You can set the original sizes displayed in [Original Size] in the [Layout Adjustment] screen.

You can assign original sizes to the buttons other than [Auto Detect].

If you frequently use non-standard size paper for scanning, setting non-standard size as the

default will save your time to specify the size each time.

A/B Series Size

You can select a size from A and B series sizes such as A4 and B5.

You can select a size from Inch series sizes such as 8.5 x 11" and 11 x 17".

You can select a size from other sizes such as photo and postcard.

This feature does not appear for some models. An optional component is required. For more information,

contact our Customer Support Center.

The displayed items may vary depending on the options installed.