Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 512

Problem Solving
15
512
Symptom
Unable to copy The document is misaligned.
with the specified
size.
The document guides on the
document feeder are not set
in the correct positions.
The document is a
nonstandard size.
The document is folded.
Unable to copy in [Output Color] is set to [Black
color. & White].
The document The document is larger than
edges are missing the printable area.
on the copy.
Outputs are not The Finisher is not attached.
stapled.
The number of pages to be
stapled exceeds the
maximum number for
stapling.
Cause
Load the document correctly.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Load the document correctly, and align the
document guides to the document.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Specify the document size, and then copy.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Flatten the curl and load the document again.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Set [Output Color] to [Auto Detect] or [Color].
Reference
Refer to "Copy" > "Copy" > "Output Color (Selecting the
Color for Copying)" in the User Guide.
Adjust [Reduce/Enlarge] to copy the
document smaller.
The Finisher is required to staple. Install the
Finisher, or change the print option settings
to cancel stapling.
Reduce papers to be less than the maximum
number for stapling. The maximum number
of pages for stapling varies depending on the
used finisher.
Reference
For more information, refer to "Finisher A2 (Optional)*"
(P.733), "Finisher B1 (Optional)*" (P.734), "C3 Finisher
(optional)" (P.736), or "C3 Finisher with Booklet Maker
(optional)" (P.738).
Remedy