Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 270

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Prints a banner sheet before a print job.

Prints a banner sheet after a print job.

Start Sheet & End Sheet

Prints a banner sheet before and after a print job.

Allow Print Driver to Override

Select the check box to print a banner sheet according to the banner sheet print settings of

the print driver.

Banner Sheet Offset

Set whether or not to offset when banner sheets are output.

Banner Sheet Tray

Select a paper tray used for banner sheets.

This setting applies to Trays 1 to 4 and 6 (optional). You cannot apply this setting to Tray 5.

PostScript Default Color

Set the default value for Post Script output color.

PostScript Paper Supply

Select whether the PostScript Deferred Media Selection feature is enabled or disabled when

the paper tray is selected. Select [Auto Select] to enable the PostScript Deferred Media

Selection feature, or [Select Paper Tray] to disable the feature.

When PostScript data generated by other than the print driver is printed, the tray is not

selected as intended depending on the description method of the PostScript data. In this

case, select [Select Paper Tray].

PostScript Font Absence

Set an action to take when a PostScript font specified in a job is not present.

Cancel Printing

Cancels printing.

Substitute Font and Print

Prints using a substitute font. Courier is used as the substitute font.

This feature does not appear for some models. An optional component is required. For more information,

contact our Customer Support Center.

Even when you select [Auto Select], the setting is automatically changed to [Select Paper Tray] when [Use

Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print PostScript data.

This feature does not appear for some models. An optional component is required. For more information,

contact our Customer Support Center.

This feature does not appear for some models. An optional component is required. For more information,

contact our Customer Support Center.