Preset Buttons; Copy Defaults - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Select a feature to display, and select [Save].

Repeat steps 2 and 3 as required.

Select [Save].

Preset Buttons

Paper Supply - Button 2 - 5

Select the paper tray displayed in the second to fifth buttons in [Paper Supply] on the

[Copy] screen.

Reduce/Enlarge - Button 3 - 4

Select the magnification ratio displayed in the third and fourth buttons in [Reduce/Enlarge]

on the [Copy] screen. Select the ratio from the Reduce/Enlarge Preset buttons registered.

Front Cover Tray - Button 1 - 3

Set the default value of the tray displayed in [Paper Supply] when an option that printed on

Front Cover is selected for [Front Cover] under [Output Format] > [Covers].

Back Cover Tray - Button 1 - 3

Set the default value of the tray displayed in [Paper Supply] when an option that printed on

Back Cover is selected for [Back Cover] under [Output Format] > [Covers].

You can set the default settings of the Copy feature. When the machine is turned on, or the

machine exits the Power Saver mode, or when the <Clear All> button is pressed, the

machine resets to the default values set here. Setting frequently used features and values

as the defaults can avoid extra operations required during the use of the machine.

For more information on each setting item, refer to "Copy" in the User Guide.

Paper Supply

Set the default value for [Paper Supply] in the [Copy] screen.

When the default value of [Reduce/Enlarge] is set to [Auto %], [Auto Select] cannot be selected for [Paper

Reduce/Enlarge

Set the default value for [Reduce/Enlarge] in the [Copy] screen. Select the ratio from

[100%], [Auto %], and the buttons registered as Reduce/Enlarge Preset buttons.

When the default value of [Paper Supply] is set to [Auto Select], [Auto %] cannot be

selected for [Reduce/Enlarge].

For information on the Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.231)".

] to display the previous screen or [

] to display the next screen.

Copy Service Settings