Trouble During Copying; Unable To Copy - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Trouble during Copying

This section describes how to resolve copy problems.

Unable to Copy

If you cannot copy a document, identify the symptom in the following table to perform the
remedy.
Symptom
The document is
not correctly fed
from the
document feeder.
Cause
The document is too small.
The document type is
unsuitable.
The document guides are set
in incorrect positions.
A piece of torn paper remains
in the document feeder.
Documents of mixed sizes are
loaded.
Trouble during Copying
Remedy
Check the minimum size of document that
can be loaded on the document feeder.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
The document feeder does not feed irregular
sized documents, business cards,
transparencies, or thin documents. In
addition, the document feeder does not feed
documents with sticky tags, paper clips, or
adhesive tape.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Adjust the document guides to the document.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Open the document feeder cover, and remove
the piece.
Reference
Refer to "Document Jams" (P.695).
When loading documents of mixed sizes, be
sure to set [Mixed Size Originals] to [On].
Otherwise, a paper jam will occur.
Reference
Refer to "Copy" > "Layout Adjustment" > "Mixed Size
Originals (Scanning Different Size Documents
Simultaneously)" in the User Guide.
15
509