Adjust Image Transfer - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Appendix

Adjust Image Transfer

This section describes how to adjust the transfer output value.
You can specify the transfer output value manually or by scanning the sample printout.
This is useful when the toner image does not transfer to the paper properly.
Adjusting the Transfer Output Value
You can specify the image transfer output value for each paper type.
Adjusting the transfer output value manually
1
Press the <Log In/Out> button and enter the System Administration mode.
2
Select [Tools] on the Services Home screen.
3
Select [System Settings] > [Common Service Settings] > [Maintenance].
4
Select [Adjust Image Transfer].
5
Select [Paper Type].
16
776
Reference
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.156).