Auto Adjust Paper Registration - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Auto Adjust Paper Registration

This section describes automatic adjustment of the printout image position.

The machine adjusts the alignment of the images to print on the paper automatically and

assigns the adjusted values to each tray.

Adjust the position of an output image when it is misaligned as a result of conditions such

as paper expansion or contraction, cutting accuracy, or paper storage.

Adjust the position of the output images with the Auto Adjust Registration settings.

Printing the Adjustment Chart

The following describes how to print an adjustment chart to adjust the position of output

image. The printed chart can be scanned both with the document feeder and the

document glass.

Press the <Log In/Out> button and enter the system administration mode.

Select [Tools] on the Services Home screen.

Select [System Settings] > [Common Service Settings] > [Maintenance].

Select [Adjust Paper Registration].

Output paper for the Adjust Paper Registration is counted for the number of printed pages. For more

information, refer to "Billing Information" (P.150).

The document glass calibrates the image with high precision because using a background sheet and

scanning the adjustment chart divided by four. On the other hand, scanning error may occur when using the

document feeder because of its structure or the machine condition although the chart is scanned

automatically.

For the background sheet, use the file "SIQA_sheet1_11x17.pdf" or "SIQA_sheet1_A3.pdf" that is stored in

the [Alignment Background Sheet] folder on the Media (Software/Product Manual). Output the file with 2-

sided printing.

When using a smart card authentication system such as IC Card Gate, you may be requested authentication

before printing or scanning an adjustment chart.

For more information on how to enter the System Administration mode, refer to "System Settings Procedure"

］to return to the previous screen or［

］to move to the next screen.