Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 171

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Auto Display of Login Screen

When the Authentication feature is enabled on the machine, set whether or not to

automatically display the login screen after turning on the machine or canceling the Power

Custom Buttons 1 to 3

You can assign services such as Copy and Send from Folder to the custom buttons on the

control panel: Custom Button 1 to Custom Button 3. To leave a feature unassigned, select

[(Not Set)].

By factory default, the following services are assigned to each button: [Copy] for the Custom Button 1, [Fax]

for the Custom Button 2, and [Review] for the Custom Button 3.

For more information, refer to "Assigning Services to the Custom Buttons" (P.40).

One-touch Buttons

Set the number of address numbers that are assigned to the one-touch buttons.

Assigns the one-touch buttons 1 to 70 to the address numbers 0001 to 0070, and buttons

M01 and M02 to the stored programming jobs 1 and 2.

Assigns the one-touch buttons 1 to 60 to the address numbers 0001 to 0060, and buttons

61 to 70, M01, and M02 to the stored programming jobs 1 and 12.

[Type 1] is selected by factory default.

Services Home

Set the layout of service buttons that appear on the Services Home screen.

For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.35).

Services Home - Additional Features

Set the layout of additional feature buttons that appear on the Services Home screen.

If you do not want to display [Setup] as an additional feature button, select the [Show this in Admin mode]

check box. You can set or change settings with the machine only when it is in the System Administration

For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.35).

Job Type on Job Status screen

Select the job types to be shown on the [Completed Jobs] screen under the [Job Status]

screen that is displayed when the <Job Status> button on the control panel is pressed.

Select from [All Jobs], [Printer & Print from Folder Jobs], [Scan, Fax, & Internet Fax Jobs], or

[Job Flow & File Transfer Jobs].

Common Service Settings