Installation Of Centreware Internet Services; Preparations; Configuration On The Machine - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

CentreWare Internet Services Settings

Installation of CentreWare Internet Services

CentreWare Internet Services provides services such as displaying the status of the machine
and jobs, and altering configurations using a web browser in a TCP/IP environment.

Preparations

Prepare a computer supporting the TCP/IP protocol and a Web browser such as Internet
Explorer
Reference

Configuration on the Machine

The following describes the configuration procedure for using CentreWare Internet Services
on the machine.
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
6
Note
3) Select [Tools] on the Services Home screen.
2
Enable the Internet Services (HTTP) port on the machine.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [Internet Services (HTTP)], and then select [Change Settings].
4) Select [Port Status], and then select [Change Settings].
5) Select [Enabled], and then select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
3
Set an IP address.
If an IP address is already set, you can skip this step. For an environment with DHCP or
BOOTP, configure the method for obtaining the address. If an IP address cannot be
obtained automatically or manual configuration is preferred, confirm the settings of an IP
address, a subnet mask, and a gateway address.
Reference
4
Select [Close] repeatedly until the [Tools] screen appears.
366
®
or Safari to use CentreWare Internet Services.
Refer to "CentreWare Internet Services Problems" (P.531) when any troubles occur during the configuration.
displayed on the screen, and select [Enter]. When a passcode is required, select [Next]
and enter the system administrator's passcode, and then select [Enter].
The default user ID is "11111".
The default passcode is "x-admin".
For information on how to set an IP address, refer to "Protocol Settings" (P.239).