Appendix
Print Head Alignment
You can correct the density unevenness of scanned data caused by the Print Head.
1
Load paper in a tray.
2
Press the <Log In/Out> button, and then enter the System Administration mode.
3
Select [Tools] on the Services Home screen.
4
Select [System Settings] > [Common Service Settings] > [Maintenance].
5
Select [Print Head Alignment].
6
Select [Print Calibration Chart].
16
762
Note
Select [Reset Adjustment Value] to reset the current adjustment value.
Note
Load paper of 210 mm x 279.4 mm or larger.
Reference
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.156).
Note
Select?
?to return to the previous screen or?
?to move to the next screen.