Booklet Maker - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Problem Solving
6
Remove the jammed staples (1), and then return the metal part pulled up in step 5 to the
original position (2).
7
Push the staple cartridge into the machine until it clicks into place.
8
Close the finisher front cover.
Staple Jams in Staple Cartridge (for C3 Finisher and C3 Finisher with

Booklet Maker)

This section describes how to clear staple jam occurred in the staple cartridge of the C3
Finisher (optional) and the C3 Finisher with Booklet Maker (optional).
1
Make sure that the machine is not operating, and open the finisher front door.
15
704
CAUTION
Be careful in removing jammed staples.
Note
If the finisher front cover is not completely closed, a message will appear and the machine remains paused.