Interface Cables; Using The Usb Interface - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Interface Cables

When you connect the machine directly to your computer, use the USB interface.
When you connect the machine to a network, use the Ethernet interface.

Using the USB Interface

This section describes the installation procedures for the USB interface.
Note
The USB interface of the machine supports USB 3.0.
1
Press the push-button power switch to switch off the power.
2
Make sure that the touch screen is blank and the <Power Saver> button is not lit.
3
Open the front cover.
4
Press the main power switch to the [ ] position to switch off the main power.
5
Remove the rear right cover.
6
Connect the USB cable to the interface connector.
Interface Cables
1
21