Output Feature - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Font Caching

To ensure hi-speed printing, outline fonts of up to a certain size are cached. Outline fonts

are converted into bitmap data temporarily and then printed. To minimize this processing

time, the processed bitmap data is saved in the memory. This process is called font caching.

The saved bitmap data is deleted when you turn the machine off or reset it. For the PCL

emulation mode, data other than that being processed is not saved.

Output Feature

This section describes the machine's output features. The following two output features are

Outputting a Pending Print Job

Forcible Output in Emulation Mode

Outputting a Pending Print Job

The printing of jobs already received by the machine can be prioritized over other jobs.

For information on prioritizing the printing of jobs already received by the machine, refer to "11 Job Status" > "Printing Pending

Jobs" in the User Guide.

Forcible Output in Emulation Mode

In emulation mode, data is not output until a complete page of data or a page-break

command is received. For a USB interface, if printing ends in the middle of a page, the next

data set waits until the time set with [Auto Eject Time] elapses.

In this case, the Forcible Printing feature does not wait for the auto eject time; however,

forcibly prints the data within the machine.

For more information on forcible printing, refer to "11 Job Status" in the User Guide.

For more information on the auto eject time, refer to "Auto Eject Time" (P.234).

Factory Default Settings

In HP-GL or HP-GL/2 emulation mode factory default setting, the document is reduced or

enlarged to print according to the paper size (Auto Layout).

HP-GL/2 Emulation