Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 118

Maintenance
The following describes how to perform calibration.
1
Select [Calibration] on the Services Home screen.
If [Calibration] is not displayed, follow the procedure below.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
3
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
3) Select [Tools] on the Services Home screen.
Note
4) Select [System Settings] > [Common Service Settings] > [Image Quality Adjustment].
2
Select [Calibration].
118
- Calibrates the screen when [High Speed] of [Image Quality] and [Auto Screening] or
[Fineness] of [Screen] in the [Color Options] tab is selected.
displayed on the screen, and select [Enter].
The default user ID is "11111".
The default passcode is "x-admin".
When the Services Home screen is not displayed on the touch screen, press the <Services Home> button.